• Aspirated filter with power equal to 1.5 kW, consisting of no. 6 filter bags plus absolute filter. This system guarantees the recovery of the precious metal and good air quality.

  • Calander Machine

    The machine is designed to shape and helically wind sheets of noble metal ( gold, silver, etc.)

    Thanks to the combined wheels action.

    Features :

    Length : 400 mm.

    Width : 460 mm.

    Height: 1250 mm.

    Weight: 70 Kg.


  • Chalk vacuum machine

    The field of application of the machine is that of producing plaster moulds used in casting.

    The characteristic of the machine in fact, make it possible to obtain moulds devoid of imperfections, due to the entrapment of air

    bubbles inside the mould , thanks to a combined vibration and air vacuum action inside the moulds drying compartment.


    Length: 1000 mm.

    Width 900 mm.

    Height 1300 mm.

    Weight: 150 kg.

  • Electronic Skein Decoiler Machine

    Electric unwinding machine for chains with electronic speed control .

    Features :

    Width: 650 mm.

    Length : 700 mm.

    Height : 1650 mm.

    Weight : 20 Kg.


  • Engraving machine

    The machine has been designed to impress customized patterns onto the surface (knurling) of metal wires or pipes. The knurling mechanism is composed of a rotating spindle on whose jaws the supports of the knurls are mounted. The wire or tube to be machined slides inside the spindle and is moved by the pulling unit (reel or other element). Depending on the type of pattern to be engraved, two spindle models can be used: with 3 or 4 jaws. In the 4-jaw spindle two to four knurls can be mounted and therefore it is possible to obtain a helix of 2 or 4 ridges, suitable for working with thin wires and tubes. The 3-jaw spindle is suitable for working on pipes and wires with sections wider than 3 mm. Depending on the section of the tube or wire to be machined, guide nozzles with holes of the same diameter must be used to allow correct positioning with respect to the tools. The machine is made of fire-painted box-shaped metal carpentry, inside which all the mechanical parts are installed. The electrical equipment is built into the machine body, while the controls are positioned outside in a position of easy and safe access.

    • Length: 650 mm
    • Width: 900 mm
    • Weight: 150 Kg
    • Minimum machinable wire diameter with 2 knurls:  0.8 mm
    • Machinable tube diameter with 3-4 knurls: Min. 3 mm – Max 12 mm


  • Skein rotator machine

    This Machine is used to prepare chains for braze welding through a mixture of oil and powder.

    The machine is equipped with two coils for loading the chain and speed switch.

    • Lenght: 460 mm
    • Width: 510 mm
    • Height: 700 mm
    • Weight: 60 Kg

    Brochure Pdf