-
Drawing machine 11 passages
The machine is designed to meet the needs of wire drawing.
Its function is to progressively reduce the section of wires of noble materials
(gold, silver, etc.) by passing them in the threading die.
The drawn wire is wound onto a reel equipped with adjustable clutch which makes it possible to
prevent the wire from tearing or from being too slow.
The machining area is fully protected by safety switches and is lubrificated by means of emulsified oil .
Features :
Length : 800 mm.
Width: 1900 mm.
Height: 1400 mm.
-
Electronic Skein Decoiler Machine
Electric unwinding machine for chains with electronic speed control .
Features :
Width: 650 mm.
Length : 700 mm.
Height : 1650 mm.
Weight : 20 Kg.
-
Engraving machine
The machine has been designed to impress customized patterns onto the surface (knurling) of metal wires or pipes. The knurling mechanism is composed of a rotating spindle on whose jaws the supports of the knurls are mounted. The wire or tube to be machined slides inside the spindle and is moved by the pulling unit (reel or other element). Depending on the type of pattern to be engraved, two spindle models can be used: with 3 or 4 jaws. In the 4-jaw spindle two to four knurls can be mounted and therefore it is possible to obtain a helix of 2 or 4 ridges, suitable for working with thin wires and tubes. The 3-jaw spindle is suitable for working on pipes and wires with sections wider than 3 mm. Depending on the section of the tube or wire to be machined, guide nozzles with holes of the same diameter must be used to allow correct positioning with respect to the tools. The machine is made of fire-painted box-shaped metal carpentry, inside which all the mechanical parts are installed. The electrical equipment is built into the machine body, while the controls are positioned outside in a position of easy and safe access.
- Length: 650 mm
- Width: 900 mm
- Weight: 150 Kg
- Minimum machinable wire diameter with 2 knurls: 0.8 mm
- Machinable tube diameter with 3-4 knurls: Min. 3 mm – Max 12 mm
Brochure
-
Grinder with cooling machine
The belt grinder is an industrial machine to be used for precision grinding of metal products, equipped with a water cooling system. The upper part of the machine is recessed in a tank for collecting the lubricating fluid which is returned to the tank where the pump is located. The fluid flow can be adjusted in terms of quantity and orientation by means of a special nozzle.
- Depth: 580 mm
- Width: 685 mm
- Height: 1250 mm
- Weight: 130 Kg
- Grinding belt size: ø esterno 250 mm – larghezza 80 mm
-
Large bull block Machine
The machine is designed to draw notable quantities of wire of considerable size.
The structure in electro welded sheet metal considerable resistance, is staggered on two
different levels: the reel traction on the one side and the drawing boxes on the other .
When working the wire the drawing holes are constantly immersed in liquid lubrificant which is kept
constant by a continuos recirculation pump located behind the large door of the engine compartment.
The reel traction is moved by an appropiate gear reduction unit driven by an independent motor.
-
Lubricated saw Machine
The machine is designed to manually cut metal objects.
The cutting operation can take place in the presence of lubrification ( emulsified oil or other lubrificant )
to obtain cutting sections of excellent quality.
For safety purposes, the machine can be equipped of protective guides for cutting spiral pipes, plates or other products.
Features:
Lenght: 650 mm.
Width: 650 mm.
Height: 1000 mm.
Weight: 130 kg
-
Magnetic tumbler Machine
The magnetic bench vibrator is a machinebuilt to perform circular vibration of metalobjects by magnetic transport. Metal objectsmust be in a special plastic containment ac-cessory (tray). The machine consists of asupport structure made of electro-weldedand painted box-like metal structure.Inside the structure there are the mecha-nical and magnetic organs that generatepower and transmit it to the metal objectscontained in the upper tank. The proces-sing area is completely protected with fixedguards.The parts that make up the machine are:the box-like structure of the machine that en-closes the electrical equipment and the me-chanics, the upper support, the plastic trayfor metal objects to be vibrated, the controlpanel, non-slip and anti-vibration feet
Features
Length. 560 mm.
Width: 550 mm.
Height : 380 mm.
Weight: 95 Kg.
Accessory tank: Ø 280 – Ø 380 m
-
Manual Skein winding machine
The machine is used for preparing the chain, in skeins, to subsequent machining processes to minimize production time.
Features :
Width . 650 mm.
Length. 700 mm.
Height: 1400 mm.
Weight : 10 Kg.
New machinery
© 2023 C.R.O.A. All Rights Reserved. 